In European countries the standardization for recharging recharges on public recharging points or for public use has been implemented.
In this way the electric user will be able to find the charging socket always suitable for his needs.
Do not risk not having the right plug!
Here are the most common types of socket:
TYPE 2
For alternating current AC
Mode 2 and Mode 3
Vehicle side and column side, single-phase and three-phase, 2 pilot contacts, maximum 32 A (single-phase 230 V) and 63 A (three-phase 400V).
CHAdeMO
For direct current DC
Mode 4
It is the DC standard of Japanese manufacturers. Usually vehicles with CHAdeMo connector also have connectors for AC charging.
CCS (Combined Charging System) o Combo2
For direct current DC
Mode 4
The AC socket is in fact constituted by the Type 2, integrating two contacts for the DC at the bottom.
This system is adopted by European car manufacturers and is becoming the standard for high power recharges (from 50kW upwards) in Europe and US.
-
Charging station, Circontrol, Energy Mobility
Circontrol DC eSpeed Basic post
The DC eSpeed Basic post is a DC charging station which can be installed for private application, where quick charge of vehicles is a must (for instance: car rentals, dealerships, private companies…).
Product features:
• Three phase system with single direct current output (DC) with a maximum power of 25kW
• Wide voltage range delivered from 150V to 950V
• Available with CCS Combo or CHAdeMO connector
• Start/Stop buttons
• RGB LEDSKU: n/a -
Charging station, Circontrol, Energy Mobility
Circontrol DC Raption 50-150
Raption is a range of extremely powerful DC charging stations, designed for installations in both public and private locations where electric vehicles have to be charged as fast as possible (less than 30 minutes).
Raption DC is available in the following versions:
- Raption 50 – 50kW DC
- Raption 150 – 150kW DC
Common features:
- OCPP Protocol 1.6 J
- Modem/Ethernet port
- RFID authentication
- Connector configuration available between CCS-CHAdeMO-Type 2 (on request)
SKU: n/a -
Accessories, Circontrol, Energy Mobility
Circontrol DLM (Dynamic Load Management)
Dynamic Load Management (DLM) is a smart system devised by Circontrol for energy management of multiple charging stations that work at the same time, to avoid exceeding the available power.
DML features are:
- Restriction of the maximum power withdrawable from the grid
- Possibility to integrate OCPP
- All the stations charging status can be controlled via SCADA
- RFID authentication
- Building’s energy monitoring
SKU: n/a -
-
-
Circontrol, Energy Mobility, Wallbox
Circontrol wallbox eNext Elite S 7,4kW / T 22kW
Circontrol wallbox eNext Elite is a wallbox designed to be installed both inside and outside homes, condominiums, workplaces and public parking lots.
- Can be connected to a back-end system via ethernet, 3G/4G and Wi-Fi
- Highest level of protection thanks to integrated DC leakage detection and welding detection.
- RFID reader
- 3.5” color display
- OCPP 1.6J protocol
- Types available: eNext Elite S 7.4kW single-phase and eNext Elite T 22kW three-phase wallbox.
SKU: n/a -
Circontrol, Energy Mobility, Wallbox
Circontrol wallbox eNext S/T
Wallbox eNext is conceived to be installed in private houses as well as in workplaces and private car parks.
This advanced system’s function is to charge electric cars and its goal is to facilitate the charging process.
- “Hi! Charger” App
- Bluetooth recognition
- DC protection 6 mA
- Can be integrated with BeON
- Versions with Type 2 sockets are equipped with safety shutters
Wallbox eNext is accessible in both single phase and three phase version:
- Wallbox eNext S (single phase)
- Wallbox eNext T (three phase)
SKU: n/a -
Energy Mobility, Fronius
FRONIUS WATTPILOT GO 11 / 22 J
Fronius Wattpilot Go offers an intelligent and flexible charging solution, suitable for all electric cars, it also offers charging options suitable for different needs, oriented towards efficiency and convenience.
- 11 kW or 22 kW portable charging solution for home and travel use.
- Can be hung vertically indoors and outdoors, is removable and therefore portable.
- Available in two power classes.
SKU: n/a -
Energy Mobility, Huawei, wallbox
Huawei Smart Charger: SCharger-7KS-S0 – SCharger-22KT-S0
The Huawei Smart Charger represents a very versatile solution for charging electric vehicles.
- 4 kW single-phase or 22 kW three-phase
- Type 2 socket
- Recharge mode 3
- Authentication methods: RFID, Bluetooth, App
- Communication: WiFi, Ethernet
- OCPP 1.6 and Modbus TCP protocols
- Available: SCharger-7KS-S0 / SCharger-22KT-S0
SKU: n/a -
Energy Mobility, Mennekes, Wallbox
Mennekes – AMTRON 4Business 700
AMTRON 4Business 700 is the versatile, innovative, and customizable wallbox introduced by Mennekes for electric vehicle charging in commercial and industrial settings.
- 11kW and 22kW variants
- With integrated cable or type 2 socket with shutter
- Remote configuration and management via the AMTRON 4Installers app
- Customizable front cover color
- Ethernet and Wi-Fi connectivity (710 and 730 versions) and 4G (730 version only)
- Authentication via RFID or AMTRON 4Drivers app
- ISO 15118-ready: designed for V2G and Plug&Charge communication
- Integrated MID meter – accurate measurement readable from the outside
SKU: n/a -
Energy Mobility, Mennekes, Wallbox
Mennekes – AMTRON 4You 100
AMTRON 4You 100 is the basic wallbox from Mennekes designed for home charging, ideal for those looking for a simple, reliable, and immediate solution for private charging without smart functions.
- Available in 7.4 kW, 11 kW, and 22 kW versions with integrated 7.5 m Type 2 cable
- Plug & play charging without authentication
- Quick and easy installation
- Safe operation with integrated DC 6 mA residual current detection
- Robust and suitable for indoor or outdoor installation (IP54, IK08)
SKU: n/a -
Energy Mobility, Mennekes, Wallbox
Mennekes – AMTRON 4You 300
AMTRON 4You 300 is the Mennekes essential and reliable wallbox for charging electric vehicles at home, designed to ensure maximum safety and ease of installation.
- 4 kW, 11 kW, and 22 kW versions with integrated 7.5 m Type 2 cable
- Quick and intuitive configuration via dip-switch
- RFID authentication
- Load management function via external meter
- Robust and suitable for indoor or outdoor installation (IP54, IK08)
SKU: n/a
