Sungrow SH RS single phase hybrid inverter

The Sungrow SH RS single-phase hybrid inverter for residential applications with powers from 3 to 6 kW is able to meet the needs of all homeowners.

It has a very high DC overload capacity, a start voltage of only 50 V so that it can start working very early in the morning and it have PV input of 16 A, so as to be compatible with all types of photovoltaic modules, including those with latest 210 mm cells which have high currents.

Battery input

Given the voltage and current, the battery input allows coupling with various brands of batteries, with a capacity that can currently reach as much as 22 kWh and the charging and discharging power is equal to the nominal power of the inverter.

From the factory is equipped with all the protections necessary to avoid string box/combiner such as DC SPD  and DC switch.

Quick fit connectors

Also it is equipped quick connectors for both photovoltaic strings, battery and AC side connection, the IP 65 protection degree and the simple wall bracket make installation operations as easy as possible.

Furthermore, the meter with open CT is always included, also designed to facilitate installation without disconnecting the power supply to the house.

Monitoring via WiFi card

Monitoring via WiFi card is included, the data transferred to iSolarCloud can be viewed anywhere thanks to the intuitive smartphone application. The same application used by the installer guides him in a few steps in commissioning.

Remote diagnosis is also easy thanks to the automatic scanning and analysis of the IV curve.

The integrated intelligent PID recovery function allows it to be used even in revamping of problematic systems, and it can also be used only for battery management on existing systems, further expanding its field of application.

, , , , ,

Sungrow SH 3.0/3.6/4.0/5.0/6.0 RS – single-phase

This Sungrow residential single-phase hybrid inverter with backup function is the perfect solution for both retrofitting and new installations. Sold with a 10-year warranty.

  • 2 MPPT
  • IP65
  • LED display
  • AC side plug and play connector
  • WLAN, Ethernet
  • Available models: SH3.0RS, SH3.6RS, SH4.0RS, SH5.0RS, SH6.0RS.

Sungrow SH 3.0/3.6/4.0/5.0/6.0 RS is a single-phase hybrid storage inverter compatible with a wide range of batteries thanks to a wide range of supported voltages.

Its technical characteristics allow it a quick charge/discharge for the demand for higher consumption and an energy continuity in case of interruption of the mains currents thanks to the seamless backup mode.

This Sungrow product offers the customer free and user-friendly online monitoring, and a simple installation method. Also included in the package is a Meter and a WINET-S.


  • Online monitoring
  • Remote firmware update
  • Integrated EMS, this function allows the automatic switching on and off of certain electrical users in order to increase the self-consumption of the photovoltaic system.


  • Exclusive push-in connectors
  • Lightweight and compact
  • Wall mounting bracket
  • Touchless commissioning with smartphone


In the event of a power failure, Sungrow SH 3.0/3.6/4.0/5.0/6.0 RS guarantees energy continuity thanks to the seamless transition to backup mode with less than 10ms.


  • Type II SPD (both DC and AC)
  • DC fuse
  • DC PV switch
  • Short circuit protection
  • Reverse battery polarity protection


The off-line configuration and commissioning of the inverter take place via the ISolarCloud monitoring platform, which also allows:

Connection to the plant, remote parameter configuration, fault management, task management, device monitoring.


Inside the package there is a Winet-S, a plug and play device capable of allowing communication both via ethernet and via WLAN.

it also allows energy independence with intelligent management of Sungrow systems through the iSolarCloud App.