Sungrow presents the new SG125CX-P2 for commercial size: more power and more flexibility

News
View: 81

With the new SG125CX-P2 product, Sungrow optimizes its solutions for the C&I range by increasing the number of MPPTs up to 12 ensuring greater flexibility in plant design.

Thanks to the dynamic optimization in case of system’s shading, the algorithm traces the entire photovoltaic curve comparing the local peak values and tracing the maximum power point by improving the overall energy production. The feature can be easily activated in our iSolarCloud app.

Maximum precision and high efficiency

The accuracy of the new I-V curve analysis never falls below 95%. Up to 17 different types of PV fault information can therefore be analysed making this inverter a high-performance product.

Compatible with modules over 500 Wp

With a direct current input of 30A for MPPT, the inverter responds to the very latest market trends and it is compatible with 500Wp photovoltaic modules.

The new AC side makes installation as convenient as possible. Connectors installed at an ideal height are easily accessible. Also, Y-connectors are no longer needed.

Sungrow SG125CX inverter with high safety standards

Safety is another of the peculiar characteristics of the SG125CX guaranteed by the IP66 protection and class C5 anti-corrosion degree. The inverter also supports the AFCI 2.0 function which introduces some new features.

The system analyzes signal and energy characteristics for 99.9% arc flash detection accuracy. Arc flashes are detected in a range of up to 100m on the +/- string and up to a maximum DC current of 30A.

Finally, for installations with only one SG125CX, the Logger1000 is no longer required to comply with the limitations related to zero entries. The meter can be connected directly to the inverter, saving installation time and costs.

, , ,

Sungrow SG125CX

SG125CX-P2 is a Multi-MPPT string inverter for 1000 VDC systems, optimizes its solutions for the C&I range with 12 MPPT ensures greater flexibility in system design.

  • Up to 12 MPPT
  • efficiency 98.5%
  • IP66 protection and class C5 anti-corrosion grade
  • Dynamic shading optimization mode
  • Equipped with AFCI 2.0
  • DC input of 30 A per MPPT
  • Evo2 DC connection – AC connection OT/DT terminal

Datasheet English

Datenblatt Deutsch

Ficha de datos Español

Complete documentation

Request a quote

Inverter for commercial and industrial installations with a maximum PV input power of 125 KVA and a maximum AC current output power of 181.1 A.

Compatible with high-power modules

This product is compatible with high-power PV modules of more than 500Wp with the presence of 30A DC input for MPPT.

It is easily installed with the new AC side due to the connectors installed at an ideal height and easily accessible; it is compatible with Aluminum AC cables with a maximum length of 240mm².

Dynamic optimization

With dynamic optimization in the event of system shading, the algorithm tracks the entire PV curve, compares local peak values, and tracks the point of maximum power, improving overall energy production (the feature can be easily enabled in the iSolarCloud app).

High throughput and compatibility

The accuracy of the new I-V curve analysis never falls below 95%. Therefore, up to 17 different types of PV fault information can be analyzed, making this inverter a high-performance product.

Security

High safety ensured by IP66 protection and class C5 anti-corrosion grade.

The inverter also supports AFCI 2.0 function, the system analyzes signal and energy characteristics for 99.9% arc detection accuracy.

Categories: , , , Tags: , , ,

Related products

Leggi tutto:

Solaredge HD Wave single-phase inverter DC/AC oversizing up to 200%
Sungrow SH RS single phase hybrid inverter
Inverters for PV commercial systems
SolarEdge Home Hub Inverter Three Phase for backup applications
Huawei three-phase inverter for C&I PV plants with storage batteries