From 2017, all the new cars placed on the European market possess at least a Type 2 socket; however, what varies is the power that each of them can absorb.
Characteristics to know
People that are considering to buy an electric car need to take into consideration the maximum charging power allowed, as that will determine the charging time.
Electric cars and charging station
When an electric car approaches a charging station, the smart management system of the charging pole can understand, by dialoguing directly with the car, the highest charging power that the car can support (also the maximum charging power of the cable is taken into consideration). Consequently, the effective charging power is going to be the minimum power among the systems (socket, car and cable).
-
Charging station, Circontrol, Energy Mobility
Circontrol DC eSpeed Basic post
The DC eSpeed Basic post is a DC charging station which can be installed for private application, where quick charge of vehicles is a must (for instance: car rentals, dealerships, private companies…).
Product features:
• Three phase system with single direct current output (DC) with a maximum power of 25kW
• Wide voltage range delivered from 150V to 950V
• Available with CCS Combo or CHAdeMO connector
• Start/Stop buttons
• RGB LEDSKU: n/a -
Charging station, Circontrol, Energy Mobility
Circontrol DC Raption 50-150
Raption is a range of extremely powerful DC charging stations, designed for installations in both public and private locations where electric vehicles have to be charged as fast as possible (less than 30 minutes).
Raption DC is available in the following versions:
- Raption 50 – 50kW DC
- Raption 150 – 150kW DC
Common features:
- OCPP Protocol 1.6 J
- Modem/Ethernet port
- RFID authentication
- Connector configuration available between CCS-CHAdeMO-Type 2 (on request)
SKU: n/a -
Accessories, Circontrol, Energy Mobility
Circontrol DLM (Dynamic Load Management)
Dynamic Load Management (DLM) is a smart system devised by Circontrol for energy management of multiple charging stations that work at the same time, to avoid exceeding the available power.
DML features are:
- Restriction of the maximum power withdrawable from the grid
- Possibility to integrate OCPP
- All the stations charging status can be controlled via SCADA
- RFID authentication
- Building’s energy monitoring
SKU: n/a -
-
-
Circontrol, Energy Mobility, Wallbox
Circontrol wallbox eNext Elite S 7,4kW / T 22kW
Circontrol wallbox eNext Elite is a wallbox designed to be installed both inside and outside homes, condominiums, workplaces and public parking lots.
- Can be connected to a back-end system via ethernet, 3G/4G and Wi-Fi
- Highest level of protection thanks to integrated DC leakage detection and welding detection.
- RFID reader
- 3.5” color display
- OCPP 1.6J protocol
- Types available: eNext Elite S 7.4kW single-phase and eNext Elite T 22kW three-phase wallbox.
SKU: n/a -
Circontrol, Energy Mobility, Wallbox
Circontrol wallbox eNext S/T
Wallbox eNext is conceived to be installed in private houses as well as in workplaces and private car parks.
This advanced system’s function is to charge electric cars and its goal is to facilitate the charging process.
- “Hi! Charger” App
- Bluetooth recognition
- DC protection 6 mA
- Can be integrated with BeON
- Versions with Type 2 sockets are equipped with safety shutters
Wallbox eNext is accessible in both single phase and three phase version:
- Wallbox eNext S (single phase)
- Wallbox eNext T (three phase)
SKU: n/a -
Energy Mobility, Fronius
FRONIUS WATTPILOT GO 11 / 22 J
Fronius Wattpilot Go offers an intelligent and flexible charging solution, suitable for all electric cars, it also offers charging options suitable for different needs, oriented towards efficiency and convenience.
- 11 kW or 22 kW portable charging solution for home and travel use.
- Can be hung vertically indoors and outdoors, is removable and therefore portable.
- Available in two power classes.
SKU: n/a -
Charging station, Energy Mobility, Mennekes
Mennekes AMEDIO Professional+
Mennekes AMEDIO Professional + is the charging station designed for the company, commercial, and hotel car parks, it guarantees an intelligent and sustainable charging infrastructure for car parks reserved for the company and customers.
- Security of investments thanks to state-of-the-art electronics
- Flexible counting options
- 2 x type 2 sockets with hinged lid for 22 kW respectively charging power and high operational safety
SKU: n/a -
Energy Mobility, Mennekes, Wallbox
Mennekes AMTRON Professional+
Mennekes AMTRON® Professional + has been designed for company and commercial vehicle fleets, hotels, restaurants etc … thanks to state-of-the-art technology and electronics, easy access to recharge and easy management by the facilities are guaranteed.
- Wallbox specially designed for industry and commerce
- Integrated modem for data transmission according to OCPP 1.6 j
- Flexible counting options
- Charging point with a maximum charging power of 22 kW
SKU: n/a -
Charging station, Energy Mobility, Mennekes
Mennekes: charging columns Basic – Smart
The charging columns and the Basic wall charging stations allow charging in mode 3 with type 2 socket </strong > Mennekes with shutter.
Both have a pleasant appearance and are manufactured with electro-galvanized sheet steel casings available in three color variants: black RAL 9005 (SW), silver RAL 9006 (SI) and Yellow RAL 1021 (GE). All are with degree of protection IP 44.
SKU: n/a -
Accessories, Energy Mobility
MENNEKES: charging connector mode 2
I veicoli elettrici vengono ricaricati normalmente in modalità 3, poiché questa è la modalità di ricarica più sicura.
Quando si è per strada e non è disponibile un infrastruttura per la ricarica in modalità 3, la modalità 2 conforme a IEC 61851 è l‘alternativa più sicura.
La ricarica avviene tramite una comune presa domestica o industriale (spina a muro SCHUKO® o CEE), ma il cavo in modalità 3 integra le funzioni di protezione e controllo nel Cable Control and Protecting Device (IC-CPD).
Questo tipo di cavo unisce la praticità di un dispositivo mobile con un aumentato del livello di protezione (SPE-PRCD) attraverso un dispositivo di comunicazione con il veicolo (modulo PWM) oltre al dispositivo SPE-PRCD che controlla permanentemente la connessione del conduttore di terra ed il modulo PWM comunica la corrente massima di carica.
In caso di anomalie, la ricarica viene interrotta così da proteggere veicolo e utilizzatore. I cavi Mennekes in modalità 2 superano i requisiti normativi offrendo funzioni aggiuntive, rendendo sicura e semplice la ricarica in modalità 2.
SKU: n/a
