The GoodWe ET 80–100 kW series expands the range of three-phase hybrid inverters designed for commercial and industrial photovoltaic and energy storage systems.
The range includes the GW80K-ET-G10, GW99.99K-ET-G10 and GW100K-ET-G10 models, with rated power outputs of 80, 99.99 and 100 kW respectively.
The inverters feature 8 MPPTs with two strings per MPPT and a maximum input current of 42 A per MPPT. This configuration provides a high degree of flexibility when designing the photovoltaic array.
Maximum PV input power reaches 160 kW for the GW80K-ET-G10 and 200 kW for the 99.99 and 100 kW models, allowing PV array oversizing of up to 200%.
The maximum input voltage is 1,000 V, while the MPPT operating voltage range extends from 160 to 950 V.
On the energy storage side, the series features two independent battery inputs, with an operating voltage range of 300 to 800 V and a nominal voltage of 600 V.
Maximum charge and discharge power reaches 88 kW for the GW80K-ET-G10, 99.99 kW for the GW99.99K-ET-G10 and 110 kW for the GW100K-ET-G10.
Intelligent energy management modes enable strategies for self-consumption, peak shaving, Time of Use and grid support.
Multiple inverters can be connected in parallel to increase overall system power and storage capacity. When combined with the GoodWe STS, the solution can also support on-grid/off-grid configurations and backup loads.
Safety features include Type I+II DC SPDs, intelligent temperature detection for AC and PV connectors, and an intelligent DC switch.
