,

Tesla Backup Gateway 2


Tesla Backup Gateway 2 manages and monitors energy flows within Tesla Powerwall energy storage systems, supporting both self-consumption and backup operation.

It automatically detects grid outages and manages the transition to off-grid operation, enabling Powerwall to supply the loads connected to the backup circuit.

  • Compatible with Tesla Powerwall 2 and Powerwall 3
  • Single-phase and three-phase supply compatibility
  • Nominal AC voltage: 230/400 V
  • Maximum overcurrent protection: 100 A single-phase, 80 A three-phase
  • Single-phase backup operation
  • Suitable for indoor and outdoor installation
  • 10-year warranty

Tesla Backup Gateway 2 is designed to manage the interaction between the Tesla Powerwall energy storage system, the photovoltaic system, the electricity grid and household electrical loads.

The device automatically detects grid outages and manages disconnection from the public electricity grid, enabling Powerwall to operate in backup mode. Once the grid supply is restored, the system automatically resumes normal grid-connected operation.

Communication with Powerwall enables energy flow monitoring and backup reserve management via the Tesla app.

Backup Gateway 2 is compatible with both single-phase and three-phase installations. In three-phase installations, backup power is available on one phase only.

The device is designed for wall-mounted installation in both indoor and outdoor environments.

Electrical specifications

Parameter Technical specification
Nominal AC voltage (line-to-neutral) 230 V
Nominal AC voltage (line-to-line) 400 V
Supply type Single-phase, three-phase
Grid frequency 50/60 Hz
Maximum overcurrent protection – single-phase 100 A
Maximum overcurrent protection – three-phase 80 A
Maximum input short-circuit current 10 kA
Overvoltage category III
Integrated meter accuracy ±0.2%
Supported earthing systems TN, TT*
Distribution board (DBO) type Type B

Functional specifications

Parameter Specification
Operating modes Self-consumption and backup
Off-grid operation Single-phase backup
Grid disconnection Automatic, on all phases
Energy monitoring Integrated
User interface Tesla app / local system interface
Compatibility Tesla Powerwall 2, Powerwall 3
Warranty 10 years

Environmental specifications

Parameter Technical specification
Operating temperature -20°C to +50°C
Operating relative humidity Up to 100%, condensing
Maximum operating altitude 3,000 m
Ingress protection rating IP55
Installation environment Indoor and outdoor
Wet location suitability Yes
Pollution degree PD2

Mechanical specifications

Parameter Technical specification
Dimensions (H × W × D) 584 × 380 × 127 mm
Weight 11.4 kg
DIN rail circuit breaker capacity Up to 9 single-pole circuit breakers
Mounting method Wall-mounted

Standards and compliance

  • Safety: IEC 62109-1, IEC 62053-22, IEC 61439-1, IEC 61439-3.
  • Electromagnetic compatibility: EMC Directive 2014/30/EU, IEC 61000-6-1, IEC 61000-6-3.
  • Environmental compliance: RoHS 2011/65/EU, WEEE 2012/19/EU, Batteries Regulation (EU) 2023/1542, REACH Regulation (EC) 1907/2006.
  • Seismic qualification: AC156, IEEE 693-2005 (High).

*Compatibility with TT earthing systems is supported by Backup Gateway 2 units with part number 1152100-13-H or later.

Three-phase configurations with a line-to-line voltage of 230 V are not supported. Device performance may be reduced under extreme ambient temperature conditions.

For correct system sizing, electrical design and configuration, refer to the official Tesla technical documentation applicable to the Powerwall generation being installed.

How does Tesla Powerwall backup work?

Learn more about the backup capabilities of Tesla Powerwall energy storage systems, single-phase and three-phase configurations, and key considerations for system sizing and design.