{"id":69514,"date":"2024-07-13T08:00:40","date_gmt":"2024-07-13T06:00:40","guid":{"rendered":"https:\/\/www.vpsolar.com\/?p=69514"},"modified":"2024-07-12T08:17:22","modified_gmt":"2024-07-12T06:17:22","slug":"system-oversizing-how-to-make-the-most-of-energy","status":"publish","type":"post","link":"https:\/\/www.vpsolar.com\/en\/system-oversizing-how-to-make-the-most-of-energy\/","title":{"rendered":"System oversizing: how to exploit the most of energy"},"content":{"rendered":"

The oversizing of the system consists of the possibility to produce more energy from the panels<\/strong> than what the inverter can transform to AC side.<\/p>\n

Sometimes it might seem like a wrong choice: why use so much power when I can’t convert it all to the AC side? In reality, this is not the case.<\/p>\n

Photovoltaic system production<\/h2>\n

During the day, the production of a photovoltaic system is not constant. There are time slots<\/strong> that, more than others, allow you to have a greater amount of energy available<\/strong>, with the same climatic conditions.<\/p>\n

Generally, at the beginning of the day, the plant’s production is very low compared to the panels’ potential. Production increases gradually throughout the morning, reaching its peak around noon.<\/p>\n

During the afternoon this goes down again until the system is switched off in the evening.<\/p>\n

Why is it convenient to oversize a system?<\/h2>\n

The non-constant production of the plant does not depend only on the time slot. Many other factors affect the amount of energy that a certain number of panels can produce in a certain amount of time.<\/p>\n