{"id":53082,"date":"2021-09-12T08:00:35","date_gmt":"2021-09-12T06:00:35","guid":{"rendered":"https:\/\/www.vpsolar.com\/?p=53082"},"modified":"2021-10-11T10:01:22","modified_gmt":"2021-10-11T08:01:22","slug":"solaredge-p300-and-p600-optimizers-now-also-valid-up-to-320w-modules","status":"publish","type":"post","link":"https:\/\/www.vpsolar.com\/en\/solaredge-p300-and-p600-optimizers-now-also-valid-up-to-320w-modules\/","title":{"rendered":"SolarEdge P300 and P600 optimizers: now also valid up to 320W modules"},"content":{"rendered":"

SolarEdge has presented a new version of the P300 and the P600 optimizers<\/strong> that adapt to a wider range of PV modules.<\/p>\n

Now, these two sizes of optimizers can be used with photovoltaic modules of maximum power 320 and 650 W respectively.<\/p>\n

Compatibility between solar modules and SolarEdge optimizers depends on the maximum input voltage<\/strong> (@min temp), the maximum input current<\/strong> and the rated input power of the solar modules.<\/p>\n

The nominal DC input power of the P300 can now be considered as 320 W (compared to the previous 300 W), and the nominal DC input power of the P600 can now be considered as 650 W (compared to the first 600 W).<\/p>\n

As can be seen from the following table, the characteristics of the modules with which the P300 and P600 are compatible are:<\/p>\n\n\n\n\n\n
\u00a0<\/strong><\/td>\n\n

DC input power *<\/strong><\/p>\n

\u00a0<\/strong>* Nominal STC power of the module. Module with power tolerance up to + 5% allowed<\/p>\n<\/td>\n

\n

Maximum input voltage<\/strong><\/p>\n

\u00a0<\/strong>Voc at the lowest temperature<\/p>\n<\/td>\n

\n

Maximum short circuit current<\/strong><\/p>\n

\u00a0<\/strong>(Isc)<\/p>\n<\/td>\n<\/tr>\n

SolarEdge P300<\/strong><\/td>\n\n

\u2264 320 W<\/p>\n<\/td>\n

\n

\u2264 48 V<\/p>\n<\/td>\n

\n

11 A<\/p>\n<\/td>\n<\/tr>\n

SolarEdge P600<\/strong><\/td>\n\n

\u2264 650 W<\/p>\n<\/td>\n

\n

\u2264 96 V<\/p>\n<\/td>\n

\n

11 A<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The change has immediate and retroactive effect for all previously manufactured P300 and P600.<\/p>\n

[vc_row][vc_column]