The power optimizers act as a DC / DC converter and are connected to 2 photovoltaic modules to increase its efficiency. SolarEdge optimizers make the intelligent modules by constantly tracking the maximum power point (MPPT) of a series or parallel of 2 modules.
They also monitor the performance of the modules by interfacing with the SolarEdge monitoring platform, and thanks to the SafeDC ™ feature, they automatically shut down the power and the voltage of the modules to ensure their levels of security when the inverter switch off.
Power optimizers for commercial and large systems
These optimizers are specifically designed to work with SolarEdge inverters, automatically maintaining a fixed string voltage, providing greater flexibility in system design with longer strings and different lengths or orientation.
- Superior efficiency (peak efficiency of 99.5%, weighted efficiency of 98.8%)
- Compatible with c-Si, thin film and high current modules (pole must not be connect to the ground)
- Covered with a 25-year warranty
- The SolarEdge commercial solution has the possibility to connect two modules for each power optimizer
- Designed for extreme environmental conditions
- Available with frame fastening for quicker installation or with bolt mounting on modules rail
Power Optimizer Model | Module Power | Module Voc | Typical Module Compatibility |
P600 | ≤600W* | ≤96V | 2 x 60-cell PV modules |
P700 | ≤730W* | ≤125V | 2 x 72-cell PV modules |
P800p (for parallel connection)** | ≤800W* | ≤83V | Parallel connection of 2 x 96-cell 5’’ PV modules |
P850 (for series connection) | ≤850W* | ≤120V | Series connection of 2 x high power or bi-facial modules |
SolarEdge power optimizer P600 / P650 / P730 / P800p / P850 for commercial installations
PV power optimization at the module-level the most cost effective solution for commercial and large field installations
- Specifically designed to work with SolarEdge inverters
- Up to 25% more energy
- Superior efficiency (99.5%)
- 25 year warranty
Datasheet
Complete documentation
PV power optimization at the module-level P600 / P650 / P730 / P800p / P850
- Specifically designed to work with SolarEdge inverters
- Fast installation with a single bolt
- Up to 25% more energy
- Advanced maintenance with module-level monitoring
- Superior efficiency (99.5%)
- Module-level voltage shutdown for installer and firefighter safety
- Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer string lengths possible
- Use with two PV modules connected in series or in parallel