ATTENTION: each Product is accompanied by an information sheet (“Technical Sheet”) which illustrates the main characteristics based on the information provided by the producers of the goods. These technical sheets are constantly updated: we therefore recommend that you always check that they correspond to the updated information on the Producer’s website.
Storage Categories
Storage
Showing 1–15 of 26 results
-
FIMER, Storage
FIMER: REACT 2
“All-in-one” storage solution, inverter with integrated high-voltage (200V) lithium-ion battery for long life.
- Ideal for new installations and retrofits
- Power ratings 3.6 and 5.0 kW
- Storage capacity ranging from 4 to 12 kWh
- Flexible design with the possibility of integration at any time
SKU: n/a -
Fronius, Fronius, Inverters
Fronius PRIMO 3.0 – 8.2 kW
Fronius is the first single-phase inverter without transformer ideal for home use with an innovative design SuperFlex.
The SnapINverter features make installation and simple maintenance.
The communications interface, the relay Energy management and the So-Meter interface are standard throughout the first series.
The Light versions are devoid of monitoring.
SKU: n/a -
Fronius, Fronius, Inverters, Storage
Fronius SYMO 3.0 – 20.0 kW
Through Symo Fronius series features a full range of three-phase inverter for all plants, from small residential to commercial and industrial facilities.
Simple and easy to install both indoors and outdoors due to the high degree of IP protection.
The Light versions are devoid of monitoring.
SKU: n/a -
Fronius, Fronius, Inverters, Storage
Fronius Symo GEN24 – hybrid three-phase – 2 MPPT – 6.0 / 8.0 / 10.0 kW Plus
Fronius, Fronius, Inverters, StorageFronius Symo GEN24 – hybrid three-phase – 2 MPPT – 6.0 / 8.0 / 10.0 kW Plus
Three-phase hybrid inverter with integrated Back-up function, the new generation of Fronius inverters guarantees maximum flexibility and efficiency.
- Integrated Data communication
- Dynamic Peak Manager
- Multi Flow Technology
- SuperFlex Design
- Full Back-up
- PV point basic grid backup
SKU: n/a -
GoodWe, Goodwe, Inverters, Storage
GoodWe EH single phase storage inverter – 2MPPT – 3.6 / 5 / 6kW
Single-phase hybrid inverter for high voltage batteries, with UPS and 2 MPPT function, pre-wired cables for quick and easy installation.
- UPS level automatic switch in 10ms
- Wide battery voltage range 85~450V
- Large loads when back-up
- Pre-wired communication cables
SKU: n/a -
GoodWe, Goodwe, Inverters, Storage
GoodWe EM series – hybrid inverters – singlephase – 2 MPPT – 3/5 kW
GoodWe, Goodwe, Inverters, StorageGoodWe EM series – hybrid inverters – singlephase – 2 MPPT – 3/5 kW
Single-phase bidirectional hybrid inverter with 2 MPPT GoodWe EM series with back-up function from the grid. With 50A charging current for storage. The back-up function is activated in just 10 ms from the disconnection from the mains, without therefore disconnecting the loads (UPS function).
- charge / discharge capacity: 2.3 / 2.3 kW
- IP65 water resistant
- remote update
- export power control
- available in sizes: GW3048-EM / GW5048-EM
SKU: n/a -
GoodWe, Goodwe, Inverters, Storage
GoodWe ESA – all-in-one – from 5.4 to 10.8 kWh
GoodWe ESA is a compact all-in-one solution, a hybrid system that combines the photovoltaic inverter and storage batteries.
- 5kW AC output
- Low voltage lithium-ion batteries (48V nominal)
- Storage capacity up to 10.8kWh (2 batteries of 5.4kWh)
- Integrated 4.6kW UPS
SKU: n/a -
GoodWe, Goodwe, Inverters, Storage
GoodWe ET series – hybrid inverters three-phase – 2 MPPT – 5 / 8 / 10 kW
GoodWe, Goodwe, Inverters, StorageGoodWe ET series – hybrid inverters three-phase – 2 MPPT – 5 / 8 / 10 kW
ET series three-phase hybrid inverter with DC coupling.
- Maximum efficiency up to 98.2%.
- Uninterruptible Power Supply Function (UPS)
- Wide battery voltage range
- Fanless design, quiet operation
SKU: n/a -
GoodWe, Goodwe, Inverters, Storage
GoodWe SBP series – retrofit – single-phase AC – 3.6 / 5.0 kW
AC inverter Single-phase retrofit with back-up function. The GoodWe SBP series features inverters with AC connection, which can be used in both single-phase and three-phase systems.
- single-phase and three-phase systems
- IP65
- 100A
SKU: n/a -
Huawei, Huawei, Inverters, Storage
Huawei Three-phase SUN2000 – 3 / 4 / 5 / 6 / 8 / 10 KTL-M0
Three-phase inverter from 3 to 10 Kw, small and light only 17kg, ideal for residential systems.
- Plug & Play battery interface
- IP65 with natural cooling
- Max. efficiency 98.6%
- Sizes available: 3 / 4 / 5 / 6 / 8 / 10 kW
SKU: n/a -
Inverters, Kostal, Kostal, Storage
Kostal PLENTICORE plus: 3.0 / 4.2 / 5.5 / 7.0 / 8.5 / 10 kW
PLENTICORE plus the new hybrid inverter from Kostal, designed for photovoltaic storage ideal for both new and existing installations.
- 3 MPPT to configure almost all types of roof
- compatible with different high voltage battery
- easy configuration
- EEBus and Sunspec for the Smart Home connection
- available in 5 power classes
SKU: n/a -
-
-
Inverter residential systems, Inverters SMA, SMA, SMA, Storage
SMA Sunny Boy Storage 3.7/5.0/6.0
The first battery inverter with a multistring battery connection. Ideal for grid-connected systems.
- Connect up to three high-voltage batteries
- 10-year warranty
- The integrated service package SMA Smart Connected for automated monitoring of battery inverters
- Fully automatic backup function for supplying electricity to the complete home (optional)
SKU: n/a