, ,

REACT-3.6/4.6-TL

ABB

The solution designed by ABB for storage is called React, synonymous with Renewable Energy Accumulator and Conversion Technology, it allows you to earn from 2 kW up to 6 kW, for maximum comfort and energy use.

1] Enhance self-consumption

2] Integrated inverter + battery

3] The battery pack is expandable

The solution designed by ABB for storage is called React, synonymous with Renewable Energy Accumulator and Conversion Technology, it allows you to earn from 2 kW up to 6 kW, for maximum comfort and energy use. The battery pack is indeed expandable from 1 and up to 3 units, to allow you to accumulate all the energy produced and then gradually release it during the night and during the day in case of shadowing, clouds passages or simply because the required power from ‘dwelling exceeds that available from the photovoltaic system.

1] Enhance self-consumption

The best way to save money is to make maximum use of the electric energy produced by the photovoltaic system, but to do so you must request it at the same time it is produced.
Sometimes you can, because you are using the appliance or are simply programmed, sometimes not. To make maximum use of solar energy, and then autoconsumare, it is now possible to install ABB React, which returns at times when the solar energy is not enough all the energy accumulated, for maximum savings.

2] Integrated inverter + battery

The new ABB React system, summarizes your all necessary components inside. The advantages of this architecture are several:
– Coordination of all energy flows in order to align the production of photovoltaic energy and domestic consumption.
– The management and the battery life are optimized in order to give maximum reliability and energy over time.
– One user interface for monitoring the production of renewable energy and managing household tasks also remoto.REACT-3.6-4.6-TL_04

3] The battery pack is expandable

With its ability to expand from the battery pack, which can be installed as a single block of 2 kWh of useful energy or as a sum of 3 elements for a capacity of accumulation of useful 6 kWh, it is possible to obtain a better autonomy from the mains and therefore greater savings on energy bills.
That option allows you to have a complete solution, with maximum comfort even in case of power failure, since the batteries may intervene to maintain active energy in the home.

– The product has been designed to have a long useful life, including a battery of the planned duration of ten years with Li-Ion technology
– The storage capacity can be increased by the addition of more batteries, for a maximum of three units

Categories: , , Tags: ,

Dati tecnici

Modello REACT-UNO-3.6-TL REACT-UNO-4.6-TL
Massima potenza DC 5000 W 6000 W
Massima tensione DC 600 V
Numero di MPPT indipendenti 2
Intervallo MPPT di tensione DC 160-520 V 180-520 V
Massima corrente DC in ingresso per ogni MPPT 12 A 13.5 A
Tipo di connessione AC alla rete Monofase
Potenza nominale AC di uscita 3600 W 4600 W
Capacità utile 2-6 Wh
Tecnologia Ioni di Litio
Rendimento Europeo 96.6 %
Rendimento Ciclo carica/scarica 94 %
Dimensioni [H x L x P] (mm) 740 x 983 – 1963 x 229
Peso (kg) 67 – 141
Grado di protezione IP 65 (inverter), IP 21 (batteria)
Backup Si

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo. More information

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Close