,

Panasonic AQUAREA DHW floor standing

Panasonic

The type of water heater systems in the heat pump of the Panasonic AQUAREA DHW to stand are products for the production of sanitary hot water with high energy efficiency and performance.

The heat pump is mounted on the kettle and mainly uses the outside air as a renewable energy source.

The range Panasonic AQUAREA DHW stand is available in 200 and 300 liters of volume of the kettle and the main features are:

  • eligible outside air temperatures from -7 to 35 ° C
  • Ecological gas R134A order to heat the sanitary water up to 65 ° C
  • Model 300AE with a coil for integration with solar thermal or boilers, …
  • Low noise fan
  • Additional electric heater dual power
  • LCD touch screen
  • Operating modes: normal, turbo and hot
  • Interface with the photovoltaic system

Water heaters heat pump Panasonic AQUAREA DHW standing operate using the thermodynamic cycle of the heat pumps which allows to heat the hot water stored in the tank, through the energy of the outside air is sucked from the ducted pipe or directly from the local.

 

The ecological gas R134A, using status changes due to compression and expansion cycles, draws its energy from the outdoor air and transfers it to the sanitary water stored in the tank.

 

The electric energy required by the water heater in the heat pump is only that required to operate the fan and one for powering the rotary piston type compressor (which allows the circulation of the R134A gas). In the case of the electric heaters are activated necessity which ensure domestic hot water production.

 

The main features are:

 

  • Ecological gas R134A order to heat the sanitary water up to 65 ° C only with the use of the heat pump
  • eligible outside air temperatures from -7 to 35 ° C
  • EN 16147 COP = 3.00 200A; 3.33 mod. 300A; 3.30 mod. 300AE;
  • Electrical power consumption mean = 490 W
  • compact product by weight = 149 kg mod. 200A; 164 kg mod. 300A; 207 kg mod. 300AE
  • DHW capacity suitable for a substitution of an existing traditional electric kettle
  • Low noise level – 58 dB (A)
  • Kettle enamelled steel with magnesium anode active
  • Exchanger wound on the outside of the tank (not immersed in healthcare)
  • immersion heater dual power of 1000 W each.
  • Model 300AE with serpentine plunged 2.7 sq.m.
  • LCD touch screen
  • Operating mode: Normal, Turbo, hot, operating programming timers, holiday arrangements and legionella function

 

Interface with the photovoltaic system to reduce the consumption of electric energy

Dati tecnici

Taglia 200A 300A 300AE
N. indicativo persone 3-5 4-6 4-6
Tipo di installazione basamento
Tipo di prodotto Monoblocco
Capacità accumulo 208 litri 295 litri 276 litri
Dimensioni 1540 x 670 mm 1930 x 670 mm
Peso a vuoto 149 kg 164 kg 207 kg
Temperatura aria min/max -7 / 35 °C
Temperatura max acqua con Pdc 65 °C
Quantità massima di acqua a 40 °C 265 litri 395 litri 368 litri
Refrigerante R134a
COP 3 3.33 3.3
Tempo di riscaldamento 6.10 h,mm 9.40 h,mm 9.39 h,mm
Potenza elettrica assorbita media 490 W
Potenza resistenza elettrica 1000 + 1000 W
Livello di pressione sonora 58 db(A)
Pressione massima esercizio 10 bar
Scambiatore di calore aggiuntivo 1 x 2.7 mq

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo. More information

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Close