, ,

Natural circulation kit Hermann Saunier Duval HelioBlock 3

Hermann Saunier Duval

The natural circulation kit Hermann Saunier Duval HelioBlock 3 are available with 150 liter storage tank with 1 collector, 200 liters with 1 or 2 collectors and 300 liters with 2 collectors. The HelioBlock 3 kits consist of the following products:

  • Collector vertical plane by 2.24 m high reliability
  • Including clamping and dedicated flat roof or sloped roof
  • Installation and activation of the simple and rapid system, as it requires the load pump solar circuit.
  • Long life and minimum maintenance Components
  • Complete with all the components required for assembly (premixed antifreeze, solar and sanitary safety valve).

The operation of HelioBlock 3 kit is based on the principle of natural movement that occurs when the heat transfer fluid is heated by the sun. The heat warms the fluid decreases in density becoming light and triggering the natural circulation between solar collector and tank.

The heat transfer fluid enters the cavity going up the kettle and transfers heat to the sanitary water inside the tank.

Giving heat to the heat transfer fluid cools, consequently increases by weight, and then descends into the solar collector by gravity, continuing the circulation. The components in the system are:

  • Vertical-type flat plate collector, for overhead installation with gross area 2,24 sqm and 2,02 sqm net, absorber with selective treatment, hydraulic circuitry harp with 4 water connections, anodised aluminum frame with rear protective plate embossed aluminum.
  • Clamping including in differentiated kits for installation on a flat roof or a pitched roof, thereby covering all types of cases.
  • Kettles with enamel cavity and complete with magnesium anode, available in sizes 150, 200 and 300 liters. You can add an optional electrical resistance.
    Premixed antifreeze complete kits, solar safety valve 3.5 bar and health safety valve 6 bar.

Taglie KIT

Taglia
del kit
150 200 200 300
N. indicativo persone 1-2 1-2 2-3 2-4
Numero collettori solari 1 1 2 2
Superficie collettori solari 2,2 mq 2,2 mq 4,5 mq 4,5 mq

I componenti:

Collettore solare HR 2.1 T
Antigelo premiscelato
Valvola sicurezza solare 3,5 bar
Valvola sicurezza sanitaria 6 bar

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo. More information

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Close