, ,

Forced circulation kit Hermann Saunier Duval HelioSet 3 PS pressurized

Hermann Saunier Duval

The HelioSet 3 PS Kit pressurized  are based on the principle of a typical operation of the solar systems with forced circulation still offering the innovations.

For example, the ability to install a 2.5 kW electrical resistance in the solar pump unit, which allows you to heat the domestic water storage tank with no risk of scale formation.

The kit HelioSet 3 PS pressurized consist of the following products:

  • Collector vertical plane from 2.51 square meters of high reliability and excellent quality / price ratio
  • Complete solar pump group unit installed on board the kettle
  • Installation and activation of the simple and rapid system
  • Long life and minimum maintenance Components
  • Complete with all the components required for assembly

The solar thermal kit Hermann Saunier Duval HelioSet pressurized PS 3 are constituted by a series of places solar collectors on the roof, capable of absorbing the radiation from the sun to heat the heat transfer fluid.

The heat transfer fluid is transferred from the collectors to the kettle FE S BM by means of a circulator in this solar pump group, managed by a control unit, which detects when the temperature in solar collectors is higher than that present in the kettle.

The kettle FE S BM, place inside the building, stores the hot water to be used by the user when needed. The components in the system are:

  • Collector CFS 2.5 / 3 vertical plane, for overhead installation with gross area 2,51 sqm and 2,35 sqm net, absorber with selective treatment, hydraulic circuitry meander with 4 water connections with quick coupling, structure with aluminum frame anodized rear sheet of embossed aluminum protection. The fixtures available to allow you to install the collectors CFS 2.5 / 3 on a flat roof or a pitched roof, thereby covering all types of cases.
  • Kettle FE S1 150 BM 150 liters monoserpentino or kettles FE S2 BM 250/350 from 250/350 liter twin coil, all glazed and suitable for hot water up to a maximum temperature of 85 ° C. Water connections positioned in the upper part of the tank (ErP class B).
  • Solar pump unit complete with control unit GHS8 installable on the kettle. Ability to install a 2.5 kW electrical resistance in the solar circuit, which allows you to heat the domestic water storage tank with no risk of scale formation.
  • Solar expansion tank and premixed antifreeze.

Taglie KIT

Taglia del Kit (l) 200 300 400 500
N. Indicativo persone 1-3 2-4 3-6 4-8
N. collettori Solari 1 2 3 4
Superficie collettori solari (mq) 2.5 5 7.5 10

I componenti

Collettore solare SKR500 SKR500 SKR500 SKR500
Bollitore doppio serpentino DHW200PR2 (ErP C) DHW200PR2 (ErP C) DHW200PR2 (ErP C) DHW200PR2 (ErP C)
Gruppo pompa solare ad alta efficienza RLGHE
Centralina solare SKSC2HE
Miscelatore termostatico TBM20
Vaso di espansione solare con kit per fissaggio al serbatoio AG18S AG25S AG25S AG33S
Antigelo puro 15 litri 15 litri 20 litri 20 litri

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo. More information

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Close